Wireless Manager - Honeywell MX9 Reference Manual

Wireless Manager

Start > Settings > Connections > Wireless Manager
Provides information on the currently connected wireless network(s). The following image is an example only.
If more than one wireless device is being managed, the All bar is displayed. Tap the All bar to disable/enable all wireless
devices at once.
If a Wi-Fi (802.11) radio is present, the Wi-Fi bar indicates the status of the Wi-Fi connection, such as:
Off
On
Unavailable
Available
Connecting
SSID
Network Card
If the Wi-Fi radio is Off, tapping the Wi-Fi bar turns the radio On. Once the radio is On, the status may cycle through other
states such as Available and Connecting before reporting a connection status such as the SSID.
If the Wi-Fi radio is in any other state than Off, tapping the Wi-Fi bar turns the radio Off.
The Wi-Fi radio is off
The Wi-Fi radio is on
No Wi-Fi networks are available
Wi-Fi networks are available but not connected
The radio is connecting to a Wi-Fi network
The SSID of the connected Wi-Fi network when managed by Wireless Manager
When the radio is connected and managed by the Summit Client Utility
4-133