Admin - Honeywell MX9 Reference Manual

Admin

The Admin tab provides the ability to change the configuration password (see the Connection panel), enter Identification
numbers for the SIM card, and provides a button to disable/enable the radio.
Password
Enter a new password, then re-enter the same password. Click Submit to save the new password.
Click the Enable Radio button to turn the radio On or Off. When the radio is Off, the Admin password will need to be entered
before the radio can be set to On.
PIN (Personal Identification Number)
The PIN is a unique sequence of numbers stored on the SIM card.
If the radio is enabled and the SIM card requires a PIN, a connection will not occur until the PIN is entered successfully. After
entering the PIN code, tap the Submit button. A message is displayed with either Success or the number of retries allowed
before the SIM card PIN number entry is locked from further use.
If the radio is disabled, entering and submitting the PIN saves the PIN value on the MX9. The next time the radio is enabled and
requires a PIN, the saved PIN will be sent and a PIN will not need to be entered again.
PUK (Personal Unblocking Key)
The PUK is a unique sequence of alpha characters displayed on the SIM card. A default PUK code is not available. After
entering the PUK code, tap the Submit button. A message is displayed with either Success or the number of retries allowed
before the SIM card PUK entry is locked from further use.
Enable/Disable Radio button
Click the Enable Radio button to turn the radio On or Off. If the radio is currently enabled, the button is labeled Disable Radio. If
the radio is currently disabled, the button is labeled Enable Radio.
4-125