Trip Computer - Functions, Digital Instrument Panel - Volvo S60 Owner's Manual

Trip computer – functions, digital
instrument panel
Information displays and controls
Function
Trip computer reset
– Average fuel consumption
– Average speed
Messages
Themes
Settings *
OK–press to access the trip computer's
functions or to activate a selection
Thumb wheel–turn to access the list of
trip computer information headings and
to scroll among the alternatives
RESET–press to cancel/reset/exit a func-
tion after a selection has been made
The trip computer has two different menu
groups:
•
Trip computer functions
•
Trip computer information headings in the
instrument panel
Functions
To open and make settings in the trip com-
puter functions:
Description
NOTE: This function does not reset the trip odometers, see Trip computer – Supplementary information
(p. 115) for a description of how this is done.
For additional information, see Information display – menu controls (p. 107).
Set the way in which information is displayed in the instrument panel, see Information displays – intro-
duction (p. 62).
Auto On Off
Select or .
03 Instruments and controls
1. Ensure that none of the trip computer
controls are being used in a command
sequence; reset them by pressing RESET
twice.
2. Press OK to open the list of functions.
3. Use the thumb wheel to scroll among the
functions and select/confirm your choice
by pressing OK.
4. After completing your selection, exit by
pressing RESET twice.
The following table lists the digital trip com-
puter's functions:
*
Option/accessory, for more information, see Introduction.
03
}}
113