INSTRUMENTS AND CONTROLS
Trip computer - digital combined
instrument panel
The information from the trip computer can be
shown in the combined instrument panel and
operated with the controls on the left-hand stalk
switch and with the combined instrument panel's
menu.
Checking and settings can be made immediately
after the combined instrument panel is automati-
cally illuminated in connection with unlocking. If
none of the trip computer's controls are actuated
within approx. 30 seconds after the driver's door
has been opened then the instrument extin-
guishes, after which either key position II or
engine starting is required in order to operate the
trip computer.
NOTE
If a warning message appears when the trip
computer is used then the message must first
be acknowledged before the trip computer
can be reactivated.
•
Acknowledge the message by briefly
pressing the indicator stalk OK button.
Heading combinations
Battery status
Trip meter T1 + Meter reading
Average
Trip meter T1 + Meter reading
118
Controls
Three trip computer options can be displayed simultane-
ously - one in each "window".
OK - opens the combined instrument panel's
menu, confirms messages or menu selec-
tions.
Thumbwheel - browses between menu
options or trip computer options.
RESET - resets the current trip meter or
goes back out of the menu structure.
Information
•
Distance to empty battery
Long press on RESET resets trip meter T1.
•
Average speed
Long press on RESET resets trip meter T1.
Trip comp. opt.
Choose which trip computer should be shown:
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Turn the thumbwheel to browse between the
heading combinations.
3. Stop at the required combination for the con-
stant display of this trip data in the combined
instrument panel.
The trip computer display in the combined instru-
ment panel can be shifted to another option at
any time during the journey. One of the options
means that no trip computer is shown.