Transmission - Geartronic - Volvo S60 Owner's Manual

Hide thumbs Also See for S60:
Table of Contents

Advertisement

08 Starting and driving
Transmission – Geartronic
Geartronic allows you to manually shift among
your vehicle's forward gears. The manual
position (+S–) can be selected at any time.
Geartronic: manual shifting (+S–)
To shift gears manually, move the
gear selector to the side from D
toward +S–. The +S– symbol in the
instrument panel will change from
white to orange and the number of the gear
1
currently being used (
,
played (see the following illustration)
To return to automatic shifting mode from
+S–, move the gear selector to the side
toward D.
Gear shift indicator*
Gear shift indicator in a digital instrument panel*
08
5
If Sport mode is being used, the symbol will change to "S".
Analog instrument panel: the gear shift indicator is displayed in the center of the speedometer.
6
*
252
Option/accessory, for more information, see Introduction.
This option indicates when to shift up or
down to help conserve fuel. A white arrow will
appear above or below the number of the
current gear to prompt the driver to shift up
or down.
While driving
If you select the manual shifting position
while driving, the gear that was being
used in the Drive position will also initially
be selected in the manual shifting posi-
tion.
2
3
,
, etc.) will be dis-
Move the gear selector forward (toward +)
5
.
to shift to a higher gear or rearward
(toward –) to shift to a lower gear.
If you hold the gear selector toward "–",
the transmission will downshift one gear
at a time and will utilize the braking power
of the engine. If the current speed is too
high for using a lower gear, the downshift
will not occur until the speed has
decreased enough to allow the lower gear
to be used.
If you slow to a very low speed, the trans-
mission will automatically shift down.
Shiftlock: Neutral (N)
If the gear selector is in the N position and
the vehicle has been stationary for at least
3 seconds (irrespective of whether the engine
is running) then the gear selector is locked.
6
In order to move the gear selector from N to
another gear position, the brake pedal must
be depressed and the ignition must be in at
least position II, see Ignition modes (p. 73).

Advertisement

Table of Contents
loading

Table of Contents