10 Maintenance and servicing
Bulbs – taillight housing
The bulbs in the taillight cluster are replaced
from inside the trunk (not the LED functions).
10
NOTE
Before starting to replace a bulb, see
Bulbs – introduction (p. 330).
1. Remove the covers in the left/right panel
to access the bulb holder.
2. Press the catches together and pull out
the bulb holder.
3. Remove the defective bulb by pressing it
in slightly and it turning counterclockwise
before pulling it out.
4. Insert a new bulb, press it in slightly and
turn it clockwise.
5. Press the bulb holder back into place and
reinstall the cover.
336
Related information
•
Bulbs – introduction (p. 330)
•
Bulbs – location of taillight bulbs (p. 335)
•
Bulbs – specifications (p. 337)
Bulbs – license plate lighting
The license plate lighting is located next to
the trunk handle.
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housing
and pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing and
tighten the screws.
Related information
•
Bulbs – specifications (p. 337)