Volvo S60 Owner's Manual page 313

WARNING
•
After using the tire sealing system, the
vehicle should not be driven farther
than approximately 120 miles (200
km).
•
Have the tire inspected by a trained
and qualified Volvo service technician
as soon as possible to determine if it
can be permanently repaired or must
be replaced.
•
The vehicle should not be driven faster
than 50 mph (80 km/h) while using a
tire that has been temporarily repaired
with the tire sealing system.
•
After using the tire sealing system,
drive carefully and avoid abrupt steer-
ing maneuvers and sudden stops.
Tire sealing system–temporarily
repairing a flat tire
Temporarily repairing a flat tire is done in two
stages:
•
Stage 1: The hole is sealed by pumping
sealing compound into the tire. The car is
then driven a short distance to distribute
the sealing compound in the tire.
09 Wheels and tires
NOTE
Do not remove any foreign objects (nails,
etc.) from the tire before using the sealing
system.
•
Stage 2: The tire's inflation pressure is
checked and adjusted if necessary.
WARNING
•
Never leave the tire sealing system
unattended when it is operating.
•
Keep the tire sealing system away
from children.
•
Be sure the vehicle is parked safely off
the road and away from moving traffic.
•
Apply the parking brake.
Related information
•
Tire sealing system* – overview (p. 312)
•
Tire sealing system* – inflating tires
(p. 315)
•
Tire sealing system* – sealing compound
container (p. 316)
•
Tire sealing system* – sealing hole
(p. 313)
•
Tire sealing system – checking inflation
pressure (p. 315)
•
Tunnel console – 12-volt sockets (p. 133)
*
Option/accessory, for more information, see Introduction.
09
311