Blis* - Limitations - Volvo S60 Owner's Manual

07 Driver support
||
However, as you back your vehicle out of a
parking space, CTA's "field of vision"
expands.
Examples of other limitations include:
•
Dirt, ice or snow obstructing the sensors
may reduce the system's function or
make it impossible to detect other vehi-
cles or objects.
•
Do not attach tape, decals, etc., on the
surface of the sensors (see the illustration
in the following "Maintenance" section).
•
BLIS and CTA are deactivated if a trailer's
wiring is connected to the vehicle's elec-
trical system.
Related information
•
BLIS* – introduction (p. 238)
•
BLIS* – function (p. 239)
•
BLIS* – operation (p. 240)
•
BLIS* – limitations (p. 242)
•
BLIS* – messages (p. 243)
07
16 Generic illustration
Cross Traffic Alert
17
*
242
Option/accessory, for more information, see Introduction.
BLIS* – limitations
Maintenance
Location of the BLIS/CTA sensors
17
The BLIS/CTA sensors are located on the
inside of the rear fenders/bumper.
The surfaces in front of the sensors must be
kept clean for the system to function opti-
mally.
CAUTION
Repairs to the BLIS/CTA systems and/or
repainting the rear bumper should only be
done by a trained and qualified Volvo serv-
ice technician.
Related information
•
BLIS* – introduction (p. 238)
•
BLIS* – function (p. 239)
•
BLIS* – operation (p. 240)
•
BLIS* – Cross Traffic Alert (CTA) (p. 240)
•
BLIS* – messages (p. 243)
16