Information Displays - Trip Odometer And Clock; Inserting/Removing Remote Key - Volvo S60 Owner's Manual

Hide thumbs Also See for S60:
Table of Contents

Advertisement

03 Instruments and controls
Information displays – trip odometer
and clock
T1
The trip odometers
and
displayed in the instrument panel.
Trip odometers
03
4
Trip odometer
Odometer display
Turn the thumb wheel on the left steering
wheel lever to display the desired trip odome-
ter.
Press and hold the RESET button on the left
steering wheel lever for at least 1 second to
reset the selected trip odometer
4
The trip odometer will be displayed differently in analog and digital instrument panels
Models with a digital information panel: press and hold RESET for more than approximately 4 seconds to reset all trip computer information
5
6
Models with an analog instrument panel: the time will be displayed in the center of the instrument panel
Not necessary in vehicles with the optional keyless drive.
7
*
72
Option/accessory, for more information, see Introduction.
Clock
T2
and clock are
Clock, digital instrument panel*
Display
Setting the clock
The clock can be set in the MY CAR menu
system. See My Car – introduction (p. 70) for
additional information about these menus.
Go to
Settings
settings. Set
box) and select the correct time zone under
Location
Related information
Information displays – introduction (p. 62)
5
.
6
System options
Time
Auto time
to ON (check the
.

Inserting/removing remote key

The remote key is used to start the engine or
to use various electrical functions without
starting the engine.
Inserting and removing the remote key
Ignition slot with remote key and START/STOP
ENGINE button.
7
Inserting the remote key
Holding the end of the remote key with the
base of the key blade, insert the remote key
into the ignition slot as shown in the illustra-
tion and press it in as far as possible.
CAUTION
Foreign objects in the ignition slot can
impair function or cause damage.

Advertisement

Table of Contents
loading

Table of Contents