Trip Computer - Introduction; Trip Computer - Functions, Analog Instru; Ment Panel - Volvo S60 Owner's Manual

Related information
•
Information displays – introduction (p. 62)
•
Information display – menu overview
(p. 107)
•
Information display – menu controls
(p. 107)
See Ignition modes (p. 73) for information about the various ignition modes.
26
Trip computer – introduction
The content and appearance of the trip com-
puter varies depending on whether the vehi-
cle is equipped with an Analog or Digital
instrument panel.
Analog information display and controls
Digital information displays and controls
03 Instruments and controls
The instrument panel illuminates as soon as
the vehicle is unlocked and trip computer set-
tings can be made. If none of the trip com-
puter's controls are used within 30 seconds
after the driver's door has been opened, the
instrument panel lighting will go out and the
trip computer cannot be used again until:
•
the ignition is put in mode II
•
the engine is started
NOTE
If a warning message appears while you
are using the trip computer, this message
must be acknowledged in order to return
to the trip computer function. Acknowl-
edge a message by pressing OK.
Related information
•
Trip computer – functions, analog instru-
ment panel (p. 110)
•
Trip computer – functions, digital instru-
ment panel (p. 113)
•
Trip computer – Supplementary informa-
tion (p. 115)
•
Trip computer – Trip statistics (p. 116)
26
03
109