Blis* - Operation; Blis* - Cross Traffic Alert (Cta) - Volvo S60 Owner's Manual

07 Driver support
BLIS* – operation
Activating/deactivating BLIS
Button for activating/deactivating BLIS
14
BLIS and CTA are activated when the
engine is started; this is confirmed when the
indicator lights on the front door panels flash
once.
BLIS can be deactivated/reactivated by
pressing the button on the center console.
The number or combinations of options on
the vehicle may not leave a space available
on the center console for the BLIS button. If
07
this is the case, BLIS can be deactivated/
reactivated in the MY CAR menu system, see
My Car – introduction (p. 70)
•
Select Off or On in Settings
settings BLIS.
Cross Traffic Alert
14
*
240
Option/accessory, for more information, see Introduction.
When BLIS is deactivated/reactivated, the
indicator lights will go out/illuminate (the indi-
cators will also flash once when the function
is reactivated) and a message will appear in
the instrument panel.
To erase the message:
•
Press the OK button on the left steering
wheel lever
or
•
Wait for approx. 5 seconds for the mes-
sage to disappear
Related information
•
BLIS* – introduction (p. 238)
•
BLIS* – function (p. 239)
•
BLIS* – Cross Traffic Alert (CTA) (p. 240)
•
BLIS* – limitations (p. 242)
•
BLIS* – messages (p. 243)
Car
BLIS* – Cross Traffic Alert (CTA)
Cross Traffic Alert (CTA) is a supplementary
BLIS 15 function intended to detect vehicles
crossing behind your vehicle while you are
backing up.
Park assist/CTA button
On vehicles equipped with the optional Park
assist system (p. 225), Cross Traffic Alert
(CTA) can be deactivated/reactivated by
pressing the Park assist button on the center
console. The BLIS indicator lights on the front
doors will flash when CTA is reactivated by
pressing the button.