Disassemble Top Shielding And Fpc Cable; Disassemble Main Board Module - Sanyo PDG-DWL100 Service Manual

2-8 Disassemble Top
Shielding and FPC Cable
1. Unscrew 11 screws (as red circle).
2. Tear off EMI tapes (as yellow square).
. Remove the Top Shielding.
4. Unplug 1 connector (as green square) to
disassemble the FPC cable.
2-9 Disassemble Main Board
Module
1. Unscrew 2 screws (as blue circle).
2. Unscrew 6 hex screws (as green circle).
3. Unscrew 2 screws (as red circle).
Top Shielding
PDG-DWL100 Confidential
FPC Cable
2-