Rod Adjustment - Sanyo PDG-DWL100 Service Manual

2-25 Rod Adjustment

1. Environment Adjustment
- The distance between the engine and
the screen is 0.66 M.
- This process should be done at a dark
environment (under 2 Lux).
2. Procedure Adjustment
- Change the screen to "white screen".
- Adjust the screws(as red circle) to
revise the image.
("screw 1" should be adjusted first, and
then "screw 2". Adjust until the yellowish
or bluish parts disappeared.)
3. Abnormal image inspection
- It should not have any abnormal color
at the rim of the image by estimating
through the eyes.
Note: - To avoid over adjusting the rod.
- After the opreation, please use the glue
to fix the screws.
- Please use Z type driver to adjust Rod
screw 1.
screw2
screw1
Z type driver
PDG-DWL100 Confidential 2-1