Disassemble Keypad Board Module; Disassemble Zoom Ring Module - Sanyo PDG-DWL100 Service Manual

2-6 Disassemble Keypad
Board Module
1. Unscrew 4 screws (as red circle) to
disassemble the Keypad Board Module
from the Top Cover Module.
2. Separate mylar, keypad board and
keypad.
3. Tear off 2 EMI gaskets (as green
square).
2-7 Disassemble Zoom Ring
Module
1. Unscrew 3 screws (as red circle) from
the Top Cover Module.
2. Remove the Zoom Ring Module.
Keypad
Zoom Ring Module
PDG-DWL100 Confidential 2-5