Section 4: Lamp Driver Waveform Download; Waveform Download - Sanyo PDG-DWL100 Service Manual

Section 4: Lamp Driver Waveform Download

5-4 Waveform Download

- Plug in the power cord.
- Hold on "Input" and "Enter" buttons, then
press "Power" button.
- After several seconds, the Temp LED and
Lamp LED will light red, then loosen "Input"
and "Enter" buttons.
- After 5 seconds, the Temp LED and
Lamp LED will flash red.
- Waveform Download is completed.
Input button
PDG-DWL100 Confidential
Enter button
5-18