Sanyo PDG-DWL100 Service Manual page 44

Criteria
4. Uniformity
Procedure
Criteria
4-11 Net�ork Function Test
1. Write Do�n Projector IP
(1) Turn on the Projector, then press "Menu
get into OSD Mode.
- Select "Setting" (as green square).
- Select "RS232 Mode", then select "Network".
(2) Select "Network", press "Enter" button. "Network", press "Enter" button. Network", press "Enter" button.
• 600:1
- Full white pattern
- Use CL100 to measure brightness values of
P1~P9 (see image: full white).
- Follow the Uniformity formula to calculate
average values.
☼ Uniformity Formula
JBMA Uniformity = Avg. (P1, P3, P7, P9)
• 65%
"Menu Menu" button to
", press "Enter" button. , press "Enter" button. "Enter" button. Enter" button. " button. button.
X100%
P5
PDG-DWL100
Full white pattern
Confidential
4-11