Sanyo PDG-DWL100 Service Manual page 12

2. Pull the Top Cover upward (as the yellow
arrow direction) to disassemble top
cover, front cover and lens cover.
Note: - When you disassemble the top cover,
take care the FPC cable which
connected Main Board and Keypad
Board Module, please unplug the
connector (as green square) from
Keypad Board Module during pulling
up.
- Avoid damaging by pulling keypad FPC
cable.
- Please hold the lens cover when
disassemble the top cover to avoid
damaging the lens (as picture A shown).
- Make sure the FPC cable plug into the
correct ports when assembling it.
3. Disassembled the Lens Cover, Front
Cover and Top Cover Module.
A
PDG-DWL100 Confidential 2-