Upgrade Procedure - Sanyo PDG-DWL100 Service Manual

5-2-3 Manley USB Driver

Upgrade Procedure

Note: - If you have installed the Manley USB
driver, there is no need to perform this
action.
1. Set up
- Plug in the power cord.
- Connect VGA-1 Port of projector with
NLINK Fixture.
- Connect NLINK Fixture with PC by
USB cable.
2. Execute Program
(1) "Found New Hardware Wiszard" picture
will appear on the screen.
(2) Select "Install from a list or specific
location (Advanced)".
(3) Click "Next".
(4) Select "Include this location in the
search", then click "Browse".
(5) "Browse For Folder" picture will appear
on the screen.
(6) Select "TPRP1" folder in the "Manley
USB Driver_N-Link" folder, then click
"OK".
(1)
(2)
(4)
(5)
(6)
PDG-DWL100 Confidential
VGA-1 port
(3)
5-11