Conference; Conference Split; Add Held; Swap - Mitel 5560 User Manual

Conference

To form a Conference when a two–party call is already in place, or to add another party to an
existing Conference:
1. Press Left or Right to select the same audio path associated with the display that
initiated or accepted the call.
2. Press Trans/Conf.
3. Dial the number of the next party.
4. Wait for an answer.
5. Press Trans/Conf.
To leave a Conference:
• Do one of the following:
• Press Release Me.
• Press Release.
• Press Cancel.

Conference Split

To Split a Conference and speak privately with the original party:
•
Press the Split softkey.

Add Held

To move a call on hold to another line appearance:
1. Press any available line appearance key.
2. Press AddHeld.
3. Press the flashing line key.
To add a call on Hold to an existing conversation or conference:
1. Press AddHeld.
2. Press the flashing line key.

Swap

To call another party when you are in an established two–party call:
1. Press Left or Right to select the handset/headset you want to use.
2. Press Trans/Conf.
3. Dial the number.
To alternate between the two parties:
•
Press Trade Calls.
Mitel 5560 IPT User Guide
29