S5648P/S5648P-Pwr Ethernet Switch; Front Panel - Huawei Quidway S5600 Series Installation Manual

Installation Manual
Quidway S5600 Series Ethernet Switches

1.3 S5648P/S5648P-PWR Ethernet Switch

1.3.1 Front Panel

I. Front panel
The S5648P/S5648P-PWR provides 48 x 10/100/1000Base-TX Ethernet ports, one
Console port, and four 1000 Mbps SFP Combo ports on its front panel, as shown in
Figure 1-8.
(1) 10/100/1000Base-T auto-negotiation Ethernet port status LEDs
(2) Console Port
(3) 7-segment digitron display
(5) Mode LED
(7) RPS LED
(9) Module LED
Figure 1-8 Front panel of the S5648P/S5648P-PWR
II. LEDs
The S5648P/S5648P-PWR provides one power LED, one RPS LED, one fabric LED,
one module LED, one mode LED, one 7-segment digitron display, four 1000 Mbps SFP
port status LEDs, and 48 x 10/100/1000Base-T port status LEDs on its front panel. The
meaning of each LED is shown in Table 1-2
III. Console port
The S5648P/S5648P-PWR provides an EIA/TIA-232-compliant console port, which
enables you to configure the switch from the local or remote site. For the attributes of
the port, refer to Table 1-4.
IV. Attributs of 1000 Mbps SFP Combo port
The S5648P/S5648P-PWR provides four SFP Combo ports on its front panel, each one
corresponding to a 10/100/1000Base-T auto-negotiation Ethernet port. For each pair,
only one port can be used at the same time. The number of the SFP Combo ports and
(4) Mode button
(6) Power LED
(8) Fabric LED
(10) 1000 Mbps SFP combo port LED
Huawei Technologies Proprietary
1-17
Chapter 1 Product Overview