Huawei Quidway S5600 Series Installation Manual page 16

Installation Manual
Quidway S5600 Series Ethernet Switches
LED
10/100/100
0BASE-T
port status
LED
Mark Status
Speed mode
Duplex mode
PoE mode
Huawei Technologies Proprietary
1-7
Chapter 1 Product Overview
Description
The port is operating at 1000
Mbps. The LED blinks quickly
Green
when the port is receiving or
sending data.
The port is operating at 10/100
Mbps. The LED blinks quickly
Yellow
when the port is receiving or
sending data.
Blinking
yellow The port fails the POST.
(at 3 Hz)
OFF The port is not connected.
The port is operating in full
duplex mode. The LED blinks
Green
quickly when
receiving or sending data.
The port is operating in half
duplex mode. The LED blinks
Yellow
quickly when
receiving or sending data.
Blinking
Yellow The port fails the POST.
(3 Hz)
OFF The port is not connected.
Solid The port
green normally.
The connected device requires
more power than the maximum
Blinking
power a port can supply.
green
The port cannot supply power
(at 1 Hz)
because the switch has reached
its maximum power supplied.
The port cannot supply power
because the connected device is
not a PD.
Solid
yellow
The port cannot supply power
due to the power source failure
of PoE.
Blinking
yellow (3 The port fails the POST.
Hz)
OFF The port does not supply power.
the port is
the port is
supplies power