Installation Manual
Quidway S5600 Series Ethernet Switches
....................................................OK!
Starting at 0x80020000...
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the switch has
completed its boot.
Press <Enter>; the system displays:
<Quidway>
You can configure the switch now.
Note:
A wide range of command views are available for Quidway Series Switches. For more
information on configuration commands and command line interfaces, refer to Quidway
S5600 Series Ethernet Switches
Ethernet Switches Command Manual.
Initialize:
LSH1LTSU...................................OK!
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
CPLD selftest..............................OK!
Switch chip selftest.......................OK!
PHY selftest...............................OK!
Please check leds....................FINISHED!
Huawei Technologies Proprietary
4-6
Chapter 4 Starting up the Switch at the Initial Boot
Operation Manual and Quidway S5600 Series