Huawei Quidway S5600 Series Installation Manual page 52

Installation Manual
Quidway S5600 Series Ethernet Switches
Step 5: Click <OK>. The Port Settings tab, shown in Figure 4-4, appears and you can
set serial port parameters. Set the following parameters:
Baud rate = 9600
Databit = 8
Parity check = none
Stopbit = 1
Flow control = none
Figure 4-4 Setting communications parameters
Step 6: Click <OK>. The HyperTerminal dialogue box appears.
Chapter 4 Starting up the Switch at the Initial Boot
Huawei Technologies Proprietary
4-3