Huawei Quidway S5600 Series Installation Manual page 11

Installation Manual
Quidway S5600 Series Ethernet Switches
S5648P-PWR: Adopts PoE power module (PSL480-AD48P, with external AC/DC
input). Its rear panel provides two fixed fabric ports and one expansion module slot
that is compatible with 8-port 1000 Mbps SFP, 1-port 10 Gbps XENPAK, and
2-port 10 Gbps XFP modules. Its front panel provides 48 x 10/100/1000Base-T
auto-negotiation Ethernet ports with RJ-45 connectors and four SFP Combo ports.
Each Combo port corresponds to an Ethernet port, so there are four port pairs;
only one port in a pair can be used at the same time. For the relationship between
the Combo ports and the Ethernet ports, refer to Table 1-1.
Table 1-1 Combo port list
Switch model
S5624P/S5624P-PWR/S
5624F
S5648P/S5648P-PWR
Note:
The electrical ports of S5624P-PWR/S5648P-PWR are capable of supplying -48
VDC power to remote PDs (powered devices, such as S2016C, S2008B, S2016B,
S2016-EI, and so on).
The S5624P-PWR/S5648P-PWR adopts PoE power module, which provides
AC/DC power to PD devices. When delivering the AC input, the module can supply
up to 300 W power. If more power is needed, use the DC input or both AC and DC
inputs to ensure the operation of all the connected devices.
The S5624P-PWR/S5648P-PWR can also adopt AC/DC dual input power module.
In this case, however, the two types of switches have no PoE function. And they
function exactly like the S5624P and S5648P.
Combo Port
25
26
27
28
49
50
51
52
Huawei Technologies Proprietary
1-2
Chapter 1 Product Overview
Corresponding port
22
24
21
23
46
48
45
47