Huawei Quidway S5600 Series Installation Manual page 18

Installation Manual
Quidway S5600 Series Ethernet Switches
LED
Fabric
LED
Module
LED
7-segmen
t digitron
display
Mark Status
Green
Yellow
STK
Blinking green (at 3 Hz)
OFF
Solid green
Module
(MOD) Blinking yellow
OFF
POST
running
POST failed
Software
downloading
Unit
Fan failed
Over
temperature
alarm
Speed and
duplex mode
Huawei Technologies Proprietary
1-9
Chapter 1 Product Overview
Description
The device is in the ring fabric
status; the LED blinks quickly
when the fabric port is receiving
or sending data.
The device is in the daisy chain
fabric status; the LED blinks
quickly when the fabric port is
receiving or sending data.
This device is isolated from the
whole set of fabric devices
(effective when this device is in
the fabric status).
Neither of the two fabric ports is
connected.
The module is seated and
operates normally.
The module fails or is not
supported.
No module is installed.
The POST ID of the in-process
Blinking test is displayed:
green
The POST ID of the failed test
Blinking blinks.
red
A light bar rotates clockwise
around the display during the
Blinking
downloading procedure.
green
An "F" is displayed.
Solid red
A "t" is displayed.
Solid red
UNIT ID in the fabric; or "1" for a
standalone unit is displayed.
Solid
green