Huawei Quidway S5600 Series Installation Manual page 17

Installation Manual
Quidway S5600 Series Ethernet Switches
LED
1000Base
SFP
mode LED
Table 1-3 LEDs on the S5624F
LED
Power
LED
DC LED
Mark
Speed mode
port
Duplex mode
PoE mode
Mark
Solid green
Blinking green (at 1 Hz)
PWR
Solid red
Blinking yellow (at 1 Hz)
OFF
Solid green
RPS
Solid yellow
OFF
Huawei Technologies Proprietary
Status
The port is operating at 1000
Mbps. The LED blinks quickly
Green
when the port is receiving or
sending data.
Blinking
yellow (3 The port fails the POST.
Hz)
OFF The port is not connected.
The port is operating in 1000
Mbps full duplex mode. The LED
Green
blinks quickly when the port is
receiving or sending data.
Blinking
yellow (3 The port fails the POST.
Hz)
OFF The port is not connected.
OFF
–
Status
The switch is started normally.
The system is running power-on
self-test (POST).
The system fails the POST, or
there is another fault.
Some ports fail the POST and
do not function.
The switch is power-off.
Both the AC power supply and
the DC input operate normally.
The AC power supply fails or the
AC input is disconnected, while
the DC input operates normally.
DC input is disconnected.
1-8
Chapter 1 Product Overview
Description
Description