Huawei Quidway S5600 Series Installation Manual page 25

Installation Manual
Quidway S5600 Series Ethernet Switches
Note:
The switch does not support the 10GBase-ER-XFP module with -5.2 V power supply.
The type of 10 Gbps XFP module may be different from those listed above. For the
accurate information about the module type, please consult market personnel or
technical support personnel of Huawei.
III. 1-port 10 Gbps XENPAK module
(1) Module power LED
(3) 10 Gbps XENPAK optical/electrical port
Figure 1-7 1-port 10 Gbps XENPAK module
This module can provide one 10 Gbps XENPAK optical port. The following table
lists the available XENPAK modules.
Table 1-10 XK1 optical port module
Port type
10GBASE-LR-
XENPAK
10GBASE-ER-
XENPAK
This module can also provide a 10 Gbps electrical port. For the electrical port, you
must select the CX4 connector and the InfiniBand cable with the transmission
distance of 15 m (49.2 ft).
Note:
Use the CX4 modules or the XENPAK optic port modules that Huawei-3Com
Technology provides or recommends.
Central
Connector
wavelength
1310 nm
SC
1550 nm
Huawei Technologies Proprietary
1-16
Chapter 1 Product Overview
(2) Port status LED
Fiber
specification
Single-mode
fiber
Transmission
distance
10 km (6.2 mi)
40 km (24.9 mi)