Table of Contents
Advertisement
User Manual
English
Select the changes you want to apply: Eg. If you choose port 1 to have Flow Control
enabled, tick the box and then press "Apply", the screen below will then appear upon
refresh. An example diagram is shown below:
5.6
Port-based VLAN
Port-based VLAN groups ports by group ID which mean ports on different VLANs
(different IDs) can't communicate with each other. The default group ID is 1, before
setting another port-based VLAN you must set up a VLAN ID group. This new group
will appear in the Port-based VLAN configuration table. Note: Only member ports in
group ID 1 will be able to access other ports on the same group. An example
diagram is shown below:
Advertisement
Table of Contents
