Download Print this page

Lindy 25044 User Manual

8 port gigabit desktop switch

Advertisement

Quick Links

Desktop Switch
User Manual
LINDY No. 25044
www.lindy.com
For Commercial Use Only!
Tested to Comply with FCC Standards
Specifications
Standards: IEEE 802.3 10Base-T, 802.3u 100Base-
TX, 802.3ab 1000Base-T, 802.3x Full Duplex & Flow
Control
Ports: 8 x RJ45 10/100/1000Mbps Gigabit Ethernet
Auto MDI/MDI-X (Auto crossover)
Network speed: 10/100/1000Mbps & Full/Half-duplex
mode auto detection (1000Mbps Full duplex only)
Switching Architecture: Store and Forward
MAC Address Table: 8k MAC entries
Buffer Memory: 144kB
Nway Auto-negotiation: All ports
Dimensions: 155 x 85 x 27 mm (WxDxH)
Weight: 0.355kg
Power Supply: 12V DC, ~1A / 100...240VAC with
Multi Country Adapters (EUR, UK, US, AUS)
Operating Temperature: 10-45° C
Operating Humidity: 10-80% (Non-condensing)
Cable Requirements: Gigabit 1000Base-T requires
RJ45 STP/UTP, Cat. 5e or higher
8 Port Gigabit
English
Introduction
Thank you for purchasing the LINDY 8 Port Gigabit
Desktop Switch. This high-performance network switch is
ideal for use in High Speed networks. Its small footprint
design means it can easily fit on your desktop without
taking up too much space.
All of the switch's ports are capable of 10, 100 or
1000Mbps auto-negotiation, whilst its 10/100/1000Mbps
auto-sensing capability provides the easiest, most hassle-
free way to migrate from a Fast Ethernet to a Gigabit
Ethernet network.
This switch delivers a dedicated 10/100/1000Mbps
connection to every attached client with no bandwidth
congestion issues. It also supports auto MDI/MDI-X
functionality - each port can be used to connect to another
switch or hub without the need for crossover cables!
The switch uses store-and-forward architecture to filter
and forward data after each packet has been received
and examined to be free of errors. All ports support full
and half-duplex operation which doubles the network
bandwidth and allows the simultaneous transmission and
reception of data.
The switch provides 9kB Jumbo frame support which can
improve network performance by allowing more data to be
sent per transmitted frame.
Packing List
8 Port Gigabit Desktop Switch
External Switching Type Power Supply with Multi-
country adapters (EU, UK, US, AUS)
This user manual
LED Indicators
LED
Status
On
POWER
Off
Flashing
Link/Act
On
Operation
Power is on
Power is off
Port is transmitting or
receiving data
Connected but not
transmitting or receiving data

Advertisement

loading

Summary of Contents for Lindy 25044

  • Page 1 Cable Requirements: Gigabit 1000Base-T requires RJ45 STP/UTP, Cat. 5e or higher Introduction Thank you for purchasing the LINDY 8 Port Gigabit Desktop Switch. This high-performance network switch is ideal for use in High Speed networks. Its small footprint design means it can easily fit on your desktop without taking up too much space.
  • Page 2 Do not place objects on top of the unit. Do not obstruct any vents on the unit Do not position the switch in direct exposure to the sun, or near any heat source such as a heater, radiator etc. Prevent water and moisture entering the unit. If necessary, use a dehumidifier to reduce humidity.