Warm Reboot; Factory Default - Lindy 25004 User Manual

User Manual
6.5 Ping
Insert the IP address you want to ping, set the Time Out time and Counts. For
example, IP=192.168.1.141, count=5, time out=5 sec, then "Apply" and "refresh". An
example diagram is shown below:
7.0 Maintenance
7.1

Warm Reboot

Select "yes" to perform a warm reboot
7.2

Factory Default

Select "yes" to perform a reset to factory default settings
Are you sure you want to perform a warm reboot?
Are you sure to reset configurations to factory default?
Warm Reboot
Factory Default
English
Yes No
Yes No