Please read this manual thoroughly, and follow the installation and operation procedures carefully to prevent any damage to the LINDY CPU Switch unit, and/or any of the devices connected to it. We have tried to keep this manual as short as possible but complete also.
PCs connected you should use non-multi-user CPU Switches in the upper cascade near the consoles. At the moment LINDY is preparing the introduction of new audio enabled CPU Switches: Please read the latest news at www.lindy.co.uk, in the LINDY catalogues or the LINDY newsletters.
Audio Stereo Input/Output for microphone and speaker, optional * At a PC with a 9 Way D Type port, a PS/2 – serial adaptor (LINDY Art. No. 70058) has to be used. The adaptor cable for the AT keyboard port is LINDY Art.No. 70139...
For an installation without cascading please use the following steps: 1. Connect the console cables to keyboard, mouse, monitor, speakers and microphone. 2. Connect the PCs with the appropriate PC ports of the CPU Switch. Use the appropriate LINDY systems cables as described before in chapter CABLES.
Page 7
Users are connected to the CPU Switch MultiMedia. The CPU Switch MultiMedia can be connected to up to 8 PCs or LINDY CPU Switch LITE OSD-8 in the second cascade. The maximum number of servers connected is 64 servers. Restriction: only one user can access the PCs connected to the second stage units CPU Switch LITE OSD-8 at the same time.
LINDY CPU Switch MultiMedia supports ‘Hot-Plugging’. This means single components like PCs, cascaded LINDY CPU switches, and mice, etc. can be removed and reattached to the installation without powering down and rebooting the CPU Switches on the installation. To ensure proper...
English Manual Function Keys F1 to F8 The function keys invoke an OSD sub menu used to configure and control the CPU Switch. Following the list of Function Keys and their meaning. F1 HELP: Displays a list of Basic HELP functions of the OSD menu options.
Page 12
F5 ADM: Only available for the administrator! F5 opens a sub menu showing options for the configuration of the CPU Switch MultiMedia. Please note that changes will affect all users that are logged in as administrator at the same time.
If the product should fail to operate correctly in normal use during the warranty period, LINDY will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside LINDY’s control. Also LINDY will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product.
Software-Inkompatibilitäten aufgehoben. Der LINDY CPU Switch MultiMedia funktioniert er mit den allermeisten PC Hardware Plattformen und mit allen Betriebssystemen. Der LINDY CPU Switch MultiMedia bietet Ihnen die effizienteste und ergonomisch optimale Lösung um mit mehreren Usern gleichzeitig auf eine Bank von bis zu 8 PCs zuzugreifen. Kein Hin- und Herrennen zwischen verschiedenen Arbeitsplätzen, alle Rechner sind vom gewohnten Arbeitsplatz mit allen lokalen...
PS/2 Tastaturanschluss (6 pol Mini-DIN) oder AT-Tastaturanschluss (5pol DIN, 5V an Pin 5, Masse an Pin 4) Audio Stereo Ein-/Ausgänge für Mikrofon und Lautsprecher optional * An einem PC mit 9p DB-Anschluß muss ein PS/2 – seriell-Adapter (LINDY Art. Nr. 70058) verwendet werden, als Adaptierung für den Tastaturport LINDY Art.Nr. 70139 Anschlusskabel Aufgrund des geringen zur Verfügung stehenden Platzes sowie der vielen notwendigen Anschlüsse...
User umgeschaltet wurde. Erlischt nach kurzer Zeit wieder. 2 – K/M Reset Um am LINDY CPU Switch einen Reset durchzuführen, benutzen Sie bitte einen dünnen Gegenstand (etwa eine Büroklammer oder einen Kugelschreiber) um diesen versenkten Taster zu betätigen; dies löst einen Warmstart des CPU-Switch aus.
1. Verbinden Sie die Anschlusskabel von Tastatur, Maus, Monitor und Audiogeräten mit den Konsolenanschlüssen. 2. Verbinden Sie die Rechner mit den PC-Anschlüssen am LINDY CPU Switch, Verwenden Sie hierbei bitte die LINDY-Kombi-System-Kabel wie im Kapitel ‚Kabel’ beschrieben. 3. Stecken Sie das mitgelieferte Netzteil in eine Steckdose und verbinden Sie anschließend das Niederspannungskabel mit der Buchse für die Stromversorgung am CPU Switch.
Page 22
Deutsches Benutzerhandbuch Installation mit kaskadierten LINDY CPU Switches Zur Zeit stehen noch keine LINDY CPU Switch mit integriertem Audio Support zum Aufbau einer Kaskadierung mit mehr als 8 Rechnern zur Verfügung. Bitte beachten Sie Produktneuerscheinungen im LINDY Katalog, im monatlichen LINDY Letter sowie auf der LINDY Homepage www.lindy.de.
Der Maustyp darf nicht gewechselt werden. Das Mauskabel sollte vor dem Tastaturkabel angesteckt werden. Nachdem das Kabel wieder angesteckt wurde, muss eventuell ein Reset auf dem LINDY CPU Switch durchgeführt werden. Drücken Sie dazu mit einem Kugelschreiber o.ä. in die K/M RESET Öffnung an der Vorderseite des CPU Switch.
Sie bitte die Anschlusskabel zu diesem. Falls sich dies als Fehlerquelle ausschließen lässt, schließen Sie den Rechner an einen anderen Port des CPU Switch an. Zeigt sich hier das gleiche Problem, und ändert auch die Verwendung eines anderen System-Anschlusskabels nicht s an der Situation, so muss mit hoher Wahrscheinlichkeit von einem Rechnerdefekt ausgegangen werden.
EMV-Kompatibilität. Garantie LINDY garantiert für einen Zeitraum von 2 Jahren ab dem Kaufdatum, dass dieses Produkt frei von Verarbeitungs- und Materialfehlern ist. Sollte das Produkt innerhalb der Garantiezeit Fehler oder Fehlfunktionen aufweisen, so wird es durch LINDY kostenlos repariert oder ersetzt. Für Schäden, die aus falscher Verwendung oder Gewalteinfluss außerhalb des Einflussbereiches von LINDY resultieren...