Mounting The Fixture - Martin Extube User Manual

• Keep combustible materials (for example fabric, wood, paper) at least
0.5 m (20 in.) away from the fixture's front cover and light output. Keep
flammable materials well away from the fixture.
The housing can reach temperatures up to 75° C (167° F). Restrict public
access or locate the fixture so that it cannot accidentally be touched.

Mounting the fixture

Warning! The Extube must be mounted on a top-hat profile 35 mm
(1.4 inch) DIN rail that is securely anchored to a surface. The
installation must conform to local electrical, building, safety and fire
regulations. If there is a danger that fixtures may cause injury or
damage if they fall, use a means of secondary attachment such as
safety cables looped around the fixtures.
Corrosion-resistant DIN rail can be ordered from Martin (see
"Accessories" on page 37).
To mount the Extube on
a surface using 35 mm
DIN rail:
1. Fasten the DIN rail
2. See Figure 1. The
12
securely to the
mounting surface.
Extube mounting
bracket has a
hooked profile on
one side. Hook this
profile over the top
of the DIN rail and
swing the bracket
down (see A). Use a
2.5 mm Allen key to
tighten the mounting
clamp screw (see
B).
Extube user manual
2. 5 2. 5
Figure 1: Mounting on DIN rail
A
B