Wall Mounting Your Telstra T210; Getting To Know Your Telstra T210 - Telstra T210 User Manual

Wall mounting your Telstra T210

5
Your TelstraT210 can be wall mounted by
screwing directly onto a wall.
Before you can wall mount your T210, you will
need to fit the wall mounting bracket supplied.
1. Locate the lugs and mount the wall bracket
provided onto the
holes under the
base unit as shown.
2. Swing the wall
bracket down to
clip into the top
hole.
Screwing onto a wall
1. Using the template on page 22, drill 2 holes
Ensure that you do not
25mm deep using a 3mm drill.
drill into any hidden
wiring or pipes
2. Insert the wall plugs and
insert a screw into each
hole. Leave 2-3mm
between the head of the
screw and the wall.
3. Position the product
onto the screws.
4. Slide down to secure.
Handset Hook
This hook keeps the handset in place when the
T210 is wall mounted.
Revolve the handset catch on
the base unit. The handset will
now be able to rest on the hook
when wall mounted.

Getting to know your Telstra T210

Volume Handsfree Mute Button
Button Button
Lets you talk
Use to adjust Allows you to someone in
the volume to hold a the same
during conversation room without
Handsfree over the the person
operation. loudspeaker you are calling
without lifting hearing you.
the handset.
6
Liquid Crystal
Display
Displays dialed
numbers and numbers
stored in the memory.
Also displays call timer,
and other visible
information.
One-touch Memories
Preprogrammed for
Telstra Call Waiting,
3-Way Chat and Telstra
Voice Assistant.
Memory Button
Allows you to dial up to
ten numbers stored in
the memory at the
touch of two buttons.
Call Indicator Light
Flashes to indicate an
incoming call. Also
flashes when storing
numbers, using mute or
setting the ringer.
Store Button
Use to store numbers in
the memory and to
change the ringer and
pitch volume
Recall Button
For use with Telstra
Phone Features and
PABX's
Redial Button
Redials the last number
called. Also, press to
enter a pause when
storing a number in the
memory.