Installing Your Slimline; Wall Mounting - Telstra Slimline 25 User Manual

Installing your
Slimline™ 25
Using the Handset Cord, plug one end into the end of
the Handset and the other end into the small socket at
the end of the base.
Connect one end of the Telephone Line Cord into the
socket at the bottom of the base.
Connect the other end of the Telephone Line Cord into
the Adaptor Plug (if required), and plug this into the
telephone wall socket. Alternatively, use the Short
Line Cord if you are wall mounting the telephone
near a telephone wall socket.
Make sure all the connections are firmly in place. Your
telephone is now ready to use.
Phone socket
3

Wall Mounting

Using the Short Line Cord included, connect the
Slimline™ 25 to the Phone Wall Plate(optional).
Position holes on the rear of the telephone over the
studs on the Phone Wall Plate and push down.
Note: Ensure the short line is located in the channel groove before
pushing down onto phone wall plate.
Slimline
™
Hang Up Switch
Memory Label
M1-M3 Buttons (memory)
Speaker Volume Buttons
Recall Button
Memory Button
Mute/Program Button
Redial/Pause Button
25 Features
M1
M2
M3
M1 M2 M3
1
2
4 5
7 8
0
*
Ringer
Memory Recall
Mute Redial
Pause
Program
4
3
6
9
#