Introduction - Ganz ZN-S100AE Hardware Manual

1. Introduction

ZN-S100AE, ZN-S1000AE, ZN-S2000AE and ZN-S4000AE compress video/audio data and transmit
the compressed video/audio data through the network in real time. GANZ encoder provides a high
quality video image with a limited bandwidth and storage capacity. These products are ideally suited
for a wide range of surveillance and remote monitoring applications. Main features are highlighted
below.
Main features
• High Quality Compression in real time streaming
• GANZ encoder provides high quality MPEG-4 and MJPEG encoding at D1 in real time.
Network
• RTP/RTSP and unicast/multicast are supported.
Streaming
• ZN-S2000AE and ZN-S4000AE support dual streaming mode such as different
codec/resolution/bit rate and so on.
• GANZ encoder supports de-interlacing by hardware.
Video/Audio
• Loop out is supported (ZN-S4000AE requires a T-BNC connector).
• ZN-S4000AE supports quad view in external monitor.
• GANZ encoder supports two ways audio (ZN-S100AE supports only audio input)
Transmits to client - G.711 by software
Receives from client - one digital audio
Additional Features
• RS-485 serial port for Pan/Tilt/Zoom. (Except ZN-S100AE)
• RS-232C serial port for some devices like a POS terminal. (Except ZN-S100AE)
• Motion detection by hardware.
• On Screen Display (OSD) by hardware.
SDK
• Three types (RTSP, UDA5,and HTTP-API) are provided for application development.
2010/2-1 O
GANZ MPEG-4 Encoder Series Hardware Manual
4