Safety Precautions - Ganz ZN-S100AE Hardware Manual

Safety Precautions

Users are strongly advised to adhere to directions and recommendations offered in this
manual. Failure to do so may result in problems during operation.
• Make sure the correct voltage is being supplied before turning the power ON.
• Do not install with the power turned ON. Doing so may cause an electric shock.
• Do not install in a very humid environment. Doing so may cause an electric shock.
• Do not install in an area exposed to sun light or heat. Doing so may cause deformation or
damage.
• Do not remove the product cover. Doing so may expose you to a hazard like electric shock.
• Do not use in areas containing inflammable materials like propane gas and gasoline or in areas
that generate dust. Doing so may cause an explosion or fire.
• Do not dismantle, repair or modify the product. Doing so may cause damage or an electric
shock. Refer all servicing to qualified personnel.
• Do not use water, thinner or organic solvent for cleaning the product exterior. Doing so may
cause damage or an electric shock. Use a dry cloth instead and turn OFF the power before
cleaning.