Introduction - Ganz ZA-NVE12K series Hardware Manual

ZA-NVE12K Hardware Manual

1. Introduction

ZA-NVE12K compress video/audio data and transmit the compressed video/audio data through the
network in real time. GANZ encoder provides a high quality video image with a limited bandwidth
and storage capacity. These products are ideally suited for a wide range of surveillance and remote
monitoring applications. Main features are highlighted below.
ZA-NVE12K
Main features
• 19" / 1U Aluminum Sub-Rack
• Support up to 3 units of 4 ch encoder Blades (Total 12 channels @ D1)
• Hot-swappable encoder blade
• Identification of each Sub-Rack and each blade unit ( for easy and quick maintenance)
• Temperature Sensor included
• Detect power supplier unit operation (Self-diagnosing)
• Detect fan unit operation (Self-diagnosing)
• Applied device: ZN-RS4000AE series (It is the blade version of ZN-S4000AE series)
ZN-RS4000AE
Main features
• High Quality Compression in real time streaming
• GANZ encoder provides high quality MPEG-4 and MJPEG encoding at D1 in real time.
Network
• RTP/RTSP and unicast/multicast are supported.
Streaming
• support dual streaming mode such as different codec/resolution/bit rate and so on.
• support de-interlacing by hardware.
Video/Audio
• Support quad view in external monitor.
• Support two ways audio ZN-S100AE 0 supports only audio input)
Transmits to client - G.711 by software
Receives from client - one digital audio
Additional Features
• RS-485 serial port for Pan/Tilt/Zoom. (Except ZN-S100AE)
• RS-232C serial port for some devices like a POS terminal. (Except ZN-S100AE)
• Motion detection by hardware.
• On Screen Display (OSD) by hardware.
SDK
• Three types (RTSP, UDA5, and HTTP-API) are provided for application development.
2010/2-1 E 5