Introduction - Ganz ZN-S100V Hardware Manual

Hide thumbs Also See for ZN-S100V:
Table of Contents

Advertisement

ZN-S100V/ZN-S1000VE HARDWARE MANUAL

1. Introduction

ZN‐S100V  and  ZN‐S1000VE  are  encoder  module.  ZN‐S100V/ZN‐S1000VE  compress 
video/audio  data  and  transmit  the  compressed  video/audio  data  through  the  network  in 
real  time.  ZN‐S100V/ZN‐S1000VE  provides  a  high  quality  video  image  with  a  limited 
bandwidth  and  storage  capacity.  ZN‐S100V/ZN‐S1000VE  also  supports  dual  stream  mode, 
and  is  equipped  with  built‐in  VCA  (Video  Content  Analysis)  feature.  These  products  are 
ideally  suited  for  a  wide  range  of  surveillance  and  remote  monitoring  applications.  Main 
features are highlighted below. 
 
 
Main features 
• High Quality Compression in real time streaming 
• H.264, MPEG‐4, and MJPEG encoding at D1 in real time 
 
Network 
• RTP/RTSP and unicast/multicast are supported. 
 
Streaming 
•Dual streaming mode such as different codec/resolution/bit rate and so on. 
•De‐interlacing on DSP. 
 
Video/Audio 
• Loop‐out video for external monitors 
• Burnt‐In text is supported 
• ZN‐S1000VE supports two ways audio. (ZN‐S100V is not available.) 
 
Additional Features 
• RS‐485/422 serial port for Pan/Tilt/Zoom. (Except ZN‐S100V) 
• RS‐232C serial port for some devices like a POS terminal. (Except ZN‐S100V) 
• Motion detection by hardware. 
• On Screen Display (OSD) by hardware. 
• POE(Power Over Ethernet) is supported. (Optional) 
 
VCA   
• VCA Presence (Included as Standard) 
• VCA Surveillance (Optional) 
 
SDK 
• Two types (RTSP and HTTP‐API) are provided for application development. 
2010/2-1 D1A.02
3
 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zn-s1000ve

Table of Contents