Configuring An Ntp Server - HIKVISION DS-9000 series User Manual

Check the DDNS checkbox to enable feature.
4.
Select DDNS Type. There are three different DDNS type to choose from, IpServer, PeanutHull and
5.
DynDNS.
• IpServer: Enter Server Address for IpServer.
• PeanutHull: Enter User Name and Password obtained from the PeanutHull website (Figure 6).
• DynDNS: Enter Server Address for DynDNS (i.e. members.dyndns.org) (Figure 7). Under DVR
Domain Name, enter the domain obtained from the DynDNS web site. Lastly, enter the User
Name and Password registered in the DynDNS network.
Figure 7. DynDNS Settings
Configuring an NTP Server
A Network Time Protocol (NTP) Server may also be setup on your DVR to keep the date and time current and
accurate.
To setup an NTP server:
Enter the Network Settings menu by clicking Menu > Setting > Network.
1.
Select the Advanced tab.
2.
Select the Set button next to NTP to enter the NTP settings menu, as shown in Figure 8.
3.
Figure 8. NTP Settings Menu
65