HIKVISION DS-9000 series User Manual page 78

Figure 2. Camera Enabled Status Menu
Select the Add button to enter IP Channel Settings menu, shown in Figure 3.
4.
Figure 3. IP Channel Settings Menu
Select the IP device from the list. The devices found in the list are those supported by SADP and are
5.
found by the DVR. If no devices were found, you may manually enter the camera parameters in the
fields below.
Enter IP camera parameters. This includes the IP address, ports, user name and password of the IP
6.
camera.
Select OK to save and return to the Camera Management menu.
7.
If IP camera was added successfully, the Status for that camera would show that it is Connected
8.
(Figure 4). If it does not, click the Set button to verify that the parameters were entered correctly. You
may also delete an added channel by clicking the Delete button.
78