HIKVISION DS-9000 series User Manual page 16

AUDIO SPOT OUT
3 VIDEO OUT
AUDIO OUT
4 LINE IN
5 VGA
6 Loop Out (Optional)
7 RS-232 Interface
8 eSATA (Optional)
9 LAN Interface
10 USB Interface
11 Termination Switch
12 RS-485 Interface
Controller Port
ALARM IN
ALARM OUT
13 GROUND
14 POWER
output only. If VGA is not connected, interface is for video output,
playback and showing PTZ controls.
BNC connector for audio output. If VGA is connected, audio is synchronized
with VGA. If VGA is not connected, audio is synchronized with VIDEO
SPOT OUT.
BNC connector for video output. If VGA is connected, the interface is used
for spot output only with local video display, playback, recording and PTZ
controls. If VGA is not connected, the interface is used as the main video
output with local video display and menu operations.
BNC connector for audio output. This connector is synchronized with VIDEO
OUT.
BNC connector for audio input.
DB9 connector for VGA output. Display local video output and menu.
DB15 interface for connection video matrix and monitor.
Connector for RS-232 devices.
Connects external SATA HDD, CD/DVD-RM or disk array.
Connector for LAN (Local Area Network).
Connector for USB devices.
RS-485 termination switch. Up position is not terminated.
Down is 120Ω termination.
Connector for RS-485 devices. T+, T- pin connects to PTZ.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the
first DVR's D+, D- pin should be connected with the D+, D- pin of the next
DVR.
Connector for alarm input (up to 16 channels).
Connector for alarm output (4 channels).
Ground(needs to be connected when DVR startup)
AC 110V ~ 220V
16