Enter the PTZ Control interface, shown in Figure 3 by clicking PTZ in the mouse menu or the PTZ
1.
button on the front panel.
Select the Patrol button to enter the Pareol Management menu, shown in Figure 5.
2.
Figure 5. Patrol Management Menu
In the Patrol Management menu, you may:
3.
• Configure Patrol:
1.
2.
3.
Select a Patrol Number to set.
Select valid presets (See Customizing Presets) and click the Set button to enter the Patrol
configuration menu. A sequence should have at least 2 valid presets.
Set the Key Point No., Duration, and Speed (Figure 6). The Key Point No. determines
the order at which the PTZ will follow while cycling through the patrol. The Duration
refers to the time span to stay at the corresponding key point. The Speed defines the rate
at which the PTZ will move from one key point to the next.
73