Triggering Alarm Outputs Manually - HIKVISION DS-9000 series User Manual

Figure 9. Alarm Output Interface
Select the output you would like to configure and click the Set button. This will bring up the settings
2.
page for the selected channel (Figure 10).
Figure 10. Alarm Output Settings
Configure the settings for selected output.
3.
Select OK to save and exit.
4.
Note:
If the Hold For option is selected as Manually Stop, the alarm will only stop when you manually stop it (See

Triggering Alarm Outputs Manually).

Note:
Triggering an IP camera will require the necessary permissions from the camera.
Triggering Alarm Outputs Manually
You may also trigger alarm outputs manually through the Manual Alarm menu.
To trigger alarm outputs manually:
Enter the Manual Alarm menu (Figure 11) by clicking Menu > Manual Alarm.
1.
55