Figure 6. Sub stream Settings Menu
Configure sub stream settings. Sub stream is only used for previewing.
6.
Click OK to save and exit out of menu.
7.
Note:
The quality of resolution, frame rate and bit rate depends on the performance of the IP camera.
Configuring OSD Settings
On Screen Display (OSD) settings can be configured in the Camera Management menu. The OSD is shown in each
display during Live Preview mode and includes the time and date as well as the camera name.
To configure OSD settings:
Enter the Camera Management/Settings menu, shown in Figure 1 by clicking Menu > Setting >
1.
Camera.
Select channel to setup OSD settings under Channel #. Click the Set button.
2.
Configure desired OSD settings, as shown in Figure 7.
3.
Figure 7. OSD Settings Menu
80