Product Specifications - SHOWTEC Genesis Scan CDM-150 Product Manual

Product Specification
Model: Showtec Genesis Scan
Voltage: 240V-50Hz (CE)
Fuse: 5A / 250V
Dimensions: 660x330x340mm (LxWxH)
Weight: 11 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: LED control panel
DMX Channels: 7
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Lamp
Allowed lamp models*:
Osram Powerstar HCI/CDM G12, 150W (9000 hr; 4200K) ordercode 80964
Osram Powerstar HCI/CDM G12 150W (9000 hr; 3000K) ordercode 80965
Philips Discharge Bulb G12 CDM 96V 150W (9000 hr; 3000K) ordercode 80974
Philips Discharge Bulb G12 CDM 96V 150W (6000 hr; 4200K) ordercode 80975
Control: Automatic and DMX remote ON / OFF
Electro-mechanical effects
Color-wheel: with variable rotation speed
Rotating Gobo-wheel: 8 gobos (2 glass gobo and 6 metal gobo).
Colorwheel: 8 Single colours, 2 Bi colours + open
DMX-control via standard DMX-controller
Sound-controlled via built-in microphone
Gobos
Gobo diameter (metal or glass) 28 mm
Maximum image diameter 22 mm
Glass gobo: heat-resistant and intensify glass; dichroic glas coating
Max. ambient temperature t : 55°C; Max. housing temperature t : 80°C
a B
Cooling: 1 axial fan in the projector
Motor: 3 high quality stepping-motor controlled by microprocessors
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 1.3m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.
Website: www.Showtec.info
Email: service@highlite.nl
18