Server cabling
In this section
BBWC cabling....................................................................................................................................... 82
Power switch cable assembly................................................................................................................... 84
Storage device cabling guidelines
CAUTION:
cables are disconnected from the back of the server, and the power cord is disconnected from
the grounded (earthed) AC outlet before installing devices.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
PCI-X Hot Plug mezzanine cabling
The server supports an optional PCI-X Hot Plug mezzanine board that provides hot-plug capability for two
expansion slots. A ribbon cable connects the PCI-X Hot Plug button to the PCI-X Hot Plug mezzanine
board.
CAUTION:
they can be pinched or crimped.
To prevent damage to the equipment, be sure that the server is powered down, all
To prevent damage to electrical components, properly ground the server before
When routing cables, always be sure that the cables are not in a position where
Server cabling 81