Cabling The Server; Cable Connections; Connecting The Msa20 - HP ProLiant DL100 G2 Installation Manual

Cabling the server

Connect the cables in the sequence shown in the figure below.
2 3
1
Figure 5 Cable connections
1
Keyboard
2
Mouse
3
Network cable
NOTE:
Connecting the power cord restores the storage server to whatever
previous powered state it was last in. This could result in the server
powering up, the fans operating, and the power indicator coming on.
NOTE:
The keyboard, mouse, and monitor are used only for the
method on page 25. They are not provided with your storage server.
With the 3TB and 6TB configurations, connect the MSA20(s) to the HP
ProLiant DL100 G2 Data Protection Storage Server using the SCSI cable(s)
shipped with the MSA20, as shown in
To MSA array
Figure 6 Connecting the MSA20
4
HP ProLiant DL100 G2 Data Protection Storage Server
5
10700B
4 Monitor
5
Power cable
Figure 6.
10704
Direct Attach
21