Unsupported Pci Card Detected Remove Pci Card From Slot; Unsupported Processor Configuration (Processor Required In Slot #1); Warning - Mixed Feature Processors Were Detected; Warning - Mixed Stepping Processors Were Detected. System Cannot Proceed - HP ProLiant DL580 User Manual

Generation 4 server
Hide thumbs Also See for ProLiant DL580:
Table of Contents

Advertisement

Unsupported PCI Card Detected Remove PCI Card from Slot

Audible beeps: 2 short
Possible cause: The PCI card installed in the slot referenced in the message is strictly not supported on this
system.
Action: Remove the card from the slot reported in the message.
Unsupported Processor Configuration (Processor Required in Slot
#1)
Description: Processor required in slot 1.
Action: If you do not install a supported processor in slot 1, this message is displayed, and the system
halts.

WARNING - Mixed Feature Processors Were Detected

Description: Mixed feature processors were detected. The server will boot using the lowest featured
processor.
If you install supported processors with different features in the same system, this informational message is
displayed.
WARNING - Mixed Stepping Processors were detected. System
cannot proceed.
Audible beeps: 1 long, 1 short
Possible cause: One or more 800-MHz front side bus speed processors have been initialized at 667-
MHz.
Action: Correct the processor configuration.

WARNING - Resetting Corrupted CMOS

Description: This informational message displays when the ROM detects that CMOS is corrupted. The
default values are restored. This message does not display if a user has intentionally invalidated the
configuration through RBSU by erasing NVRAM.

WARNING - Resetting Corrupted NVRAM

Description: This informational message displays when the ROM detects that NVRAM is corrupted. The
default values are restored. This message does not display if a user has intentionally invalidated the
configuration through RBSU by erasing NVRAM.
Troubleshooting 114

Advertisement

Table of Contents
loading

Table of Contents