Kaba E-PLEX 2000 Series Installation Instructions Manual page 24

Hide thumbs Also See for E-PLEX 2000 Series:
Table of Contents

Advertisement

®
KABA E-PLEX
2xxx SERIES
LIMITED WARRANTY
Kaba Access Control warrants this product to be free from defects in material
and workmanship under normal use and service for a period of two (2) years.
Kaba Access Control will repair or replace, at our discretion, 2xxx Series Locks
found by Kaba Access Control analysis to be defective during this period. Our
only liability, whether in tort or in contract, under this warranty is to repair or
replace products that are returned to Kaba Access Control within the two (2)
year warranty period.
This warranty is in lieu of and not in addition to any other warranty or condi-
tion, express or implied, including without limitation merchantability, fitness for
purpose or absence of latent defects.
ATTENTION: This warranty does not cover problems arising out of improper
installation, neglect or misuse. All warranties implied or written will be null and
void if the lock is not installed properly and / or if any supplied component part
is substituted with a foreign part. If the lock is used with a wall bumper, the
warranty is null and void. If a doorstop is required, we recommend the use of a
floor secured stop.
The environment and conditions of use determine the life of finishes
on Kaba Access Control products. Finishes on Kaba Access Control products are
subject to change due to wear and environmental corrosion. Kaba Access
Control cannot be held responsible for the
deterioration of finishes.
Authorization to Return Goods
Returned merchandise will not be accepted without prior approval. Approvals
and Returned Goods Authorization Numbers (RGA Numbers) for the 2xxx Series
are available through our Customer Service department in Winston-Salem, NC
(800) 849-8324. The serial number of a lock is required to obtain this RGA
Number. The issuance of an RGA does not imply that a credit or replacement
will be issued.
The RGA number must be included on the address label when material
is returned to the factory. All component parts including latches and strikes
(even if not inoperative) must be included in the package with return. All
merchandise must be returned prepaid and properly packaged to the address
indicated.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-plex 2400 series

Table of Contents