For Autodeadbolt ASM, rotate hub (H) until the deadbolt (D) is fully
retracted. The deadbolt will extend approx. 1/16" from the mortise case.
1/16"
H
D
Hold deadbolt (D) gently. Press and release the auxiliary latch (X). You should
feel the deadbolt trigger and begin to extend under the force of the spring.
D (hold gently)
X (press and release)
Release the deadbolt (D) gently. It should extend to 5/16" approx. and stop. If
the deadbolt extends past this point, gently press it in until it locks at 5/16"
throw, or start step b again.
5/16"
D
17